HomeShopEnvitec OOM202 Medical Ventilator Oxygen Sensor
In Stock
Envitec OOM202 Medical Ventilator Oxygen Sensor
₨ 27,500
Envitec Honeywell OOM202 Medical Ventilator Oxygen Sensor
Made in Germany
The EnviteC Medical Oxygen Sensors are intended as oxygen sensing component of an oxygen analyzer that measures oxygen concentration in breathing gas mixtures in the following applications: Sensing device for oxygen in medical ventilators, anesthesia machines, incubators, and control device of oxygen concentrators.
OOM 202 For SIEMENS, Hamilton, Medisys, Agva, Puritan Bennette Oxygen Sensor. The EnviteC Medical Oxygen Sensors are intended as oxygen sensing component of an oxygen analyzer that measures oxygen concentration in breathing gas mixtures in the following applications: Sensing device for oxygen in medical ventilators, anesthesia machines, incubators, and control device of oxygen concentrators.
Designed and manufactured according to EN ISO 13485
Accurate and reliable fast response
Resistant to N2OTechnical support
Made in Germany
FDA cleared
Technical Specifications OOM202-2
Measurement range 0 % … 100 % oxygen (at atmospheric pressure)
Nominal sensor lifetime ≥ 1 000 000 % volume oxygen hours
Output in ambient air 9 mV … 13 mV
Electrical interface Flying leads with 3 pin female connector (Molex® 22-01-2037)
Accuracy meets ISO 80601-2-55 requirements
Repeatability < 1 % volume O2 at constant temperature and pressure
Linearity error < 3 % relative
Response time < 12 s to 90 % of final value
Zero offset voltage < 200 µV in 100 % nitrogen, applied for 5 min
Cross interference meets ISO 80601-2-55 requirements
Influence of humidity -0.03 % rel. per % RH at 25 °C
Pressure range 0.6 bar … 2 bar (ppO2 0 … 1250 mbar O2)
Influence of pressure proportional to change in oxygen partial pressure
Influence of mechanical shock < 1 % relative after a fall from 1 m
Operating temperature 0 °C … +50 °C
Temperature compensation built-in NTC compensation
Effect of temperature compensation (steady state)
between +25 °C and +40 °C: 3 % relative error
between 0 °C and +50 °C: 8 % relative error
Operating humidity 0 % … 99 % RH non-condensing
Long term output drift < 1 % volume oxygen per month
typically < -15 % relative over lifetime
Storage temperature -20 °C … +50 °C
Recommended storage +5 °C … +15 °C
Recommended load ≥ 10 kOhms
Warm-up time < 30 minutes, after replacement of sensor
Weight approximately 28 grams
Part number 01-00-0068
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.
Envitec Honeywell OOM202 Medical Ventilator Oxygen Sensor
Made in Germany
The EnviteC Medical Oxygen Sensors are intended as oxygen sensing component of an oxygen analyzer that measures oxygen concentration in breathing gas mixtures in the following applications: Sensing device for oxygen in medical ventilators, anesthesia machines, incubators, and control device of oxygen concentrators.
EnviteC by Honeywell
Envitec OOM202 is compatible with Arduino
Oxygen sensor OOM202 for Ventilator OOM202 O2 sensor O2 cell ENVITEC Germany Oxygen battery 00M202
Features:
1.Replacement part for Oxygen sensor OOM202
2. Comes in Sealed Tin Can
Rubber sole
Fantastic arch support: Men flip flops with thick cushioned sole and rugged foot bed have supplies great traction for handle long walks.
Non-slip sole: Synthetic rubber out sole provides a good skid and wear resistance in thong sandals.
Fashion and fit upper: Fashion outdoor sport sandals are versatile on summer.
Comfortable and Soft: The mid sole is made of TPR material which make sure your toe and feet feel comfortable.
Various occasions: Perfect to take them on hiking, on boating trips and even for walking on beaches
Specifications
Shoe Size
7
Gender
Male
Color
Black / Black / Dgh Solid Grey
Manufacturer Part Number
FW8213_580
Brand
Reebok
Manufacturer
Reebok
The Auto Lensmeter LM-7P / 7 series has established a new standard by NIDEK.
Both design and user interface have been improved for simplified operation to expand utility of the instrument, while maintaining the highly valued measurement principles, functionality and quality
Fluke 177 True-RMS Digital Multimeter delivers the right features for electrical maintenance experts. With its precision, reliability, and ease of use, the Fluke 177 DMM is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III.
Wide 1000 V measurement range
True-RMS for precise measurement of non-linear signals
Backlight for work in dimly lit areas
Manual and automatic ranging
Display Hold and Auto Hold
Frequency and capacitance measurements
Resistance, continuity and diode measurements
Min-max-average recording
Closed case calibration through front panel
Ergonomic case with integrated protective holster
Specifications
Condition
New
Material
Plastic
Manufacturer Part Number
AU1217XB
Model
AU1217XB
Brand
Aurora GB
Features
Auto Button
Off Button
REV Button
Assembled Product Dimensions (L x W x H)
12.48 x 8.90 x 20.28 Inches
Content
Product Description
OOM 202 For SIEMENS, Hamilton, Medisys, Agva, Puritan Bennette Oxygen Sensor.
The EnviteC Medical Oxygen Sensors are intended as oxygen sensing component of an oxygen analyzer that measures oxygen concentration in breathing gas mixtures in the following applications: Sensing device for oxygen in medical ventilators, anesthesia machines, incubators, and control device of oxygen concentrators.
Designed and manufactured according to EN ISO 13485
Accurate and reliable fast response
Resistant to N2OTechnical support
Made in Germany
FDA cleared
Technical Specifications OOM202-2
Measurement range 0 % ... 100 % oxygen (at atmospheric pressure)
Nominal sensor lifetime ≥ 1 000 000 % volume oxygen hours
Output in ambient air 9 mV … 13 mV
Electrical interface Flying leads with 3 pin female connector (Molex® 22-01-2037)
Accuracy meets ISO 80601-2-55 requirements
Repeatability < 1 % volume O2 at constant temperature and pressure
Linearity error < 3 % relative
Response time < 12 s to 90 % of final value
Zero offset voltage < 200 µV in 100 % nitrogen, applied for 5 min
Cross interference meets ISO 80601-2-55 requirements
Influence of humidity -0.03 % rel. per % RH at 25 °C
Pressure range 0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2)
Influence of pressure proportional to change in oxygen partial pressure
Influence of mechanical shock < 1 % relative after a fall from 1 m
Operating temperature 0 °C ... +50 °C
Temperature compensation built-in NTC compensation
Effect of temperature compensation (steady state)
between +25 °C and +40 °C: 3 % relative error
between 0 °C and +50 °C: 8 % relative error
Operating humidity 0 % ... 99 % RH non-condensing
Long term output drift < 1 % volume oxygen per month
typically < -15 % relative over lifetime
Storage temperature -20 °C ... +50 °C
Recommended storage +5 °C … +15 °C
Recommended load ≥ 10 kOhms
Warm-up time < 30 minutes, after replacement of sensor
Weight approximately 28 grams
Part number 01-00-0068
Product details of Fashion Slippers shower slides Slippers for men Slides for men Flipflop for men
Slippers for men
100% Synthetics
Rubber sole
Shaft measures approximately low-top from arch
Platform measures approximately 0-3 inches
Regular fit
Slip on construction
Comfortable
Long lasting wear
Trendy And Stylish
Slippers for men
Flip flop for men
Slides for men
Rubber sole
Fantastic arch support: Men flip flops with thick cushioned sole and rugged foot bed have supplies great traction for handle long walks.
Non-slip sole: Synthetic rubber out sole provides a good skid and wear resistance in thong sandals.
Fashion and fit upper: Fashion outdoor sport sandals are versatile on summer.
Comfortable and Soft: The mid sole is made of TPR material which make sure your toe and feet feel comfortable.
Various occasions: Perfect to take them on hiking, on boating trips and even for walking on beaches
Product details
Fresh from the past. Throwback tennis-inspired style gives these men's shoes a legit look. A clean, minimalist design with etched lines on the midsole and perforations keep these kicks chic. The upper mixes soft leather and airy mesh for a low-key vibe.
We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.
FEATURES
Hartmann sensor with 108 measurement points
An advanced measurement principle, that incorporates simultaneous measurement of 108 data points within the nosepiece, provides greater accuracy and reliability with easier and faster measurements.
Automatic lens type detection
Placing the lens on the nosepiece activates the auto lens type detection to automatically determine the lens type -not only for single focal lenses but also for multifocal lenses- switching its measuring mode accordingly for a single focal lens, bifocal or progressive lens.
Scale mode function
Pupillary distance such as the LPD / RPD, PD, can be measured easily by aligning the marked glasses to the scale displayed on the screen. Screen color can be changed to black or white depending on marking color for greater visibility.
UV transmittance measurement
UV transmittance is presented as an intuitive display from 0 to 100% of central wavelength 365 nm (UV-A) in 1 or 5% increments.
Full graphic vertical 5.7-inch color LCD with touch screen
he adoption of the 5.7-inch 640 x 480 dots touch screen achieves ideal layout display, superior in operation and visibility. Unique vertical design gives a sophisticated impression and greater function. The position of the graphics can be adjusted to accommodate the operator’s position.
Enhanced data communication capability
The LM-7 series has one RS-232C port and two USB ports as standard. Optional LAN / WLAN connections are also available, which greatly expand data communication capability.
Measure twice as fast as other multimeters with Fluke 177 Digital Multimeters; digital display with analog bar graph and backlight.
With its precision, reliability and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.
The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.
Specifications
Voltage DC
Accuracy1
±(0.09% + 2)
Max. resolution
0.1 mV
Maximum
1000 V
Voltage AC
Accuracy1
±(1.0% + 3)
Max. resolution
0.1 mV
Maximum
1000 V
Current DC
Accuracy1
±(1.0% + 3)
Max. resolution
0.01 mA
Maximum
10 A
Current AC
Accuracy1
±(1.5% + 3)
Max. resolution
0.01 mA
Maximum
10 A
Resistance
Accuracy1
±(0.9% + 1)
Max. resolution
0.1 Ω
Maximum
50 MΩ
Capacitance
Accuracy1
±(1.2% + 2)
Max. resolution
1 nF
Maximum
10,000 µF
Frequency
Accuracy1
±(0.1% + 1)
Max. resolution
0.01 Hz
Maximum
100 kHz
1. Accuracies are best accuracies for each function
Environmental Specifications
Operating temperature
-10°C to +50°C
Storage temperature
-30°C to +60°C
Humidity (without condensation)
0% – 90% (0°C – 35°C)
0% – 70% (35°C – 50°C)
Safety Specifications
Overvoltage category
EN 61010–1 to 1000 V CAT III
EN 61010–1 to 600 V CAT IV
Agency approvals
UL, CSA, TÜV listed and VDE Pending
Mechanical and General Specifications
Size
43 x 90 x 185 mm
Weight
420 g
product description
Product details
The Aurora GB 12-Sheet Cross-Cut ShredSafe CD/Credit-Card Shredder is designed for use in a home or home office. It is specially made to deliver a high level of performance. This reliable machine includes Shred Safe technology where a safety power shut-off will engage when forced entry is detected. The cover plate completely closes the feed entry when not in use. It has durable steel cutters that shred documents. There is a dedicated feed slot that enables destruction of CDs, as well. It has an LED standby/power status indicator light so you will see that it is on.
It includes an integrated pull-out 4.8-gallon wastebasket
It also has free-rolling, 360-degree swivel casters that allow for easy mobility
The Aurora shredder with pull-out wastebasket has a blend of silver and black tones that will give your space a modern look that you can enjoy
Reviews
There are no reviews yet.