| Description | 1, Size: L2200mm×W950mm×H500mm 2, Function: Backrest adjustment range:0～75º，±2º Footrest adjustment range:0～45º，±2º The dynamic load of the bed surface is over 250KG, and the payload is over 400KG. 3, Accessory Detail: *Rail:The side hole installation mode is adopted, and the six-point support anti-clamping mode puts an end to the hidden danger of safety. The height of the guardrail is 37cm, which can effectively prevent the risk of falling bed. *Head/foot board: Blow Molding of High strength Engineering Plastics makes the surface smooth and easy to clean. The plug-in structure has the advantages of high strength, and convenient to disassemble | This vane anemometer is designed to measure wind speed and temperature. It's an ideal device for outdoor activities like Drone Flying, Windsurfing, Flying Kite, Aeromodelling, UAV, Sailing, Surfing, Fishing, Hiking, Shooting, Walking, etc. |
- 5-staff aluminum alloy side rail;
- Bedsheet top made from perforated steel, epoxy powder coated, and baked finish.
- Bed framework made from mild steel ERW rectangular tubes.
- covered castors dia.125mm with brake.
- Powerful actuator system.
- Dimension: 2080*970*500mm.
| specification
Full arch tray
You may not make restorations using double-sided impressions because of accuracy concerns. To achieve higher accuracy you may want to use a full arch metal tray impression for maxillary and mandible, and use traditional bite material to align them.
Scanning implant position from an impression
Using an implant analog type scanbody, the system can get the patient’s oral model and implant position without making the plaster model from the implant impression.
Includes:
- Scanning software
- No annual fees
- 12-second full arch scan
- Full-size articulator support
- 3 axis impression scanning
- True life colour capture
| SPECIFICATIONS
- Weight: 112.9gr
- Dimensions : 42.8mm x 48mm x 82mm (H x W x L)
- Suitable for adult diabetics (age › 18)
- A memory of 2000 measurements
- Device Range:
Invasive module capability tested: 20-600 mg/dl (1.1-33.3 mmol/L)
Non-invasive module tested: 30-600 mg/dL (1.6-33.3 mmol/L)
- All supplies required for the calibration are included with the CoG
WHO IS IT FOR
The CoG device is optimal for people who are not insulin depended, who wish to have better control of their glucose pattern via appropriate food, i.e. what sort of ingredients or food combination may cause rapid glucose increase in the blood or result in a higher glucose level, and/or to improve physical activity, e.g. what is the best time to have a nice walk in the neighborhood and for how long. Frequent measuring assists having a better understanding of your personal glucose pattern and to reduce the HbA1C level (the average glucose in the blood).
Device Accuracy:
75% of the results are within 20% accuracy with total MARD (Mean Absolute Relative Difference) that vary between 14%-17%. Please review Q&A for additional information. The CoG is the only accurate non-invasive glucometer existing in the market. |
Manufacturer Part Number
MOTHXXXGLAS2
PPU Quantity of Units
13.6 Each
Color
5x Handheld Magnifier
Product Name
Insten Magnifying Glass 5X, Crystal Clear 3" Lens Handheld Magnifier for Book, Maps, Classroom Science, Insect & Hobby, Seniors and Kids
|
| Content | DESCRIPTION
1, Size: L2200mm×W950mm×H500mm 2, Function: Backrest adjustment range:0～75º，±2º Footrest adjustment range:0～45º，±2º The dynamic load of the bed surface is over 250KG, and the payload is over 400KG. 3, Accessory Detail: *Rail:The side hole installation mode is adopted, and the six-point support anti-clamping mode puts an end to the hidden danger of safety. The height of the guardrail is 37cm, which can effectively prevent the risk of falling bed. *Head/foot board: Blow Molding of High strength Engineering Plastics makes the surface smooth and easy to clean. The plug-in structure has the advantages of high strength, and convenient to disassemble. *The ABS Crank: Molded at one time, with anti-collision structure design, and can be folded at 0 °～180 °. *Castors: Using 125mm mute castors, two-wheel design to avoid hair involvement. Adopt 4-wheel independent brake system. *Drainage hook: Arranged on both sides of the bed to facilitate nursing operation. *Hidden shelf are designed under the bed to place the dinner plate. *The ABS wrap angle formed by one-time injection molding can only be detachable by special tools, with the infusion rod inserted on it.
| Features:
- Wind speed and temperature measurement
- Wind speed in Beaufort wind scale bar graph
- Wind chill indicator
- Measure wind speed and temperature
- Switchable temperature unit (°C/°F)
- Switchable wind speed unit (m/s, km/h, ft/min, knots, mph)
- Wind speed range: 0-30m/s
- Wind temperature range: -10~45°C (14~113°F)
- High precision pressure sensor
- Quick response, external thermistor
- Low battery indicator
- Data HOLD function
- Large easy-to-read LCD display
- With LED lighting
- With LCD backlight
- Manual or Automatic turn off function
- CE Approved
- MAX / MIN / AVG / Current wind speed measurement
Product Specifications
Product Details
| Wind Velocity Measurement |
| Measurement Range: |
0~30 m/s, 0~5860 ft/min, 0~55 knots, 0~90 km/h, 0~65 mph |
| Resolution: |
0.01 m/s, 1.968 ft/min, 0.019 knots, 0.036 km/h, 0.022 mph |
| Threshold: |
0.3 m/s, 60 ft/min, 0.6 knots, 1 km/h, 0.7 mph |
| Accuracy: |
±5%±0.1 m/s, ±5%±20 ft/min, ±5%±0.2 knots, ±5%±0.4 km/h, ±5%±0.2 mph |
|
|
| Wind temperature measurement |
| Measurement range: |
-10~45°C (14~113°F) |
| Resolution: |
0.1°C / 0.2°F |
| Accuracy: |
±2°C / ±3.6°F |
| Temperature Sensor: |
Negative Temperature Coefficient Resistance |
|
|
| Operating Environment |
| Temperature: |
-10~45°C (14~113°F) |
| Humidity: |
Less than 90%RH |
| Storage Temperature: |
-10~50°C (14~122°F) |
| Battery: |
1 x 9V battery (6F22) |
| Current consumption: |
About 6mA |
| Weight: |
approx. 184g (including battery) |
| Size: |
165 x 85 x 39mm |
Set Includes:
- 1 x Anemometer
- 1 x 9V Battery
- 1 x Lanyard
- Carrying pouch
- English Operation Manual
- Standard Factory Packaging
| Description
Medical Supplies pk brings you the best Three(3) Functions Electric Hospital Beds with FEATURES & SPECIFICATIONS of Three Function Electric Hospital Bed.
- 5-staff aluminum alloy side rail;
- Bedsheet top made from perforated steel, epoxy powder coated, and baked finish.
- Bed framework made from mild steel ERW rectangular tubes.
- covered castors dia.125mm with brake.
- Powerful actuator system.
- Dimension: 2080*970*500mm.
- With drainage bag holders
- With telescopic SS IV pole
Three Function Electric Hospital Bed is best offered by us we are offering this product. | Product Description
Medit Identica T500 Dental 3D Scanner
Identica T500 offers a fast scan engine and highly efficient software algorithm. With the high-speed camera and projector, you can scan a full arch in just 12 seconds and eight dies within 19 seconds. Using state-of-the-art blue light scanning technology, Identica T500 is able to capture the highest quality scans with accuracy within <7 microns
Speed & accuracy
- 2.0 MP cameras, Blue LED
- Accuracy : 7 μm (ISO)
- Full arch scan time 12 sec
- Impression scanning
Identica T500 dramatically improves the most important aspects of scanner performance. The latest software technology provides you with the cleanest and sharpest data. It introduces an advanced new camera system with dual 2.0 MP resolution offering the best performance and scan data quality ever in Identica scanners.
Next generation impression scanning
Automatic impression scanning – 3 axis arm + auto double-sided impression
The 3-axis impression arm of Identica T500 will automatically scan both side of an impression, allowing you to take an auto double-sided impression scan in one step.
Double sided impression and plaster stump
This feature makes it easy to overcome the difficulty of checking the margin of preparation teeth on the impression. Medit combines data from your stone die with data from the impression scan to provide you with the crisp, accurate margins your work demands.
Full arch tray
You may not make restorations using double-sided impressions because of accuracy concerns. To achieve higher accuracy you may want to use a full arch metal tray impression for maxillary and mandible, and use traditional bite material to align them.
Scanning implant position from an impression
Using an implant analog type scanbody, the system can get the patient’s oral model and implant position without making the plaster model from the implant impression.
Includes:
- Scanning software
- No annual fees
- 12-second full arch scan
- Full-size articulator support
- 3 axis impression scanning
- True life colour capture
| Product Description
CNOGA TensorTip COMBO GLUCOMETER (CoG)
THE CoG STORY
Non-invasive Hybrid Glucometer provides you a better tool to manage your diabetes
Cnoga Medical TensorTip Combo Glucometer (CoG) is a personalized hybrid non-invasive and invasive glucometer that allows you to monitor your glucose levels frequently without constant pricking. Frequent glucose measurement can help you improve your lifestyle management for better glucose level control. Better diabetes management will not only lower your HbA1C but more importantly prevent future disease complications
Hybrid – Two devices in One
- During the initial calibration period, you need to measure your glucose levels invasively and non-invasively simultaneously usually for 3 days
- After the initial calibration, the invasive component is calibrating the non-invasive component in order to adjust to your daily changing glucose patterns and your lifestyle
The CoG provides instant glucose and HbA1C tests as frequently as you want
- HbA1C test reflects your blood sugar control over the past 3 months. Testing your HbA1C level is the common way for you and your doctor to understand how well your blood sugar levels are controlled
- Frequent glucose monitoring improves awareness of your glucose patterns and thus assists you in complying with the diet that is right for you, persist with physical activity, adjusting medicine and more, all to better control your glucose levels
HOW IT WORKS
Four light-emitting diodes (LEDs) within the finger compartment emit a discrete wavelength from ~ 600 ~ 1000 nm through the fingertip. As the light wave passes through the tissue and blood capillaries, the light is partially absorbed and consequently, the light signal is changed. The traversed light is then projected onto a color image sensor (camera). The unique high-resolution camera photographs in real time the light that traverses the fingertip tissue. The color images are stored in a digital memory for analysis by a dedicated algorithm
|
Manufacturer Part Number
MOTHXXXGLAS2
PPU Quantity of Units
13.6 Each
Color
5x Handheld Magnifier
Product Name
Insten Magnifying Glass 5X, Crystal Clear 3" Lens Handheld Magnifier for Book, Maps, Classroom Science, Insect & Hobby, Seniors and Kids
|
Reviews
There are no reviews yet.