Description
Sherlock Type 1 are neutral solutions formulated for leak-testing lines, cylinders and tanks carrying pure oxygen, but also used widely for testing fuel tanks, pneumatic systems – in fact any product or system that can be leak-tested with air or gas pressure. Sherlock T1-8S-24 contains no oil, grease or any other ingredient that could combine with pure oxygen to form either a flammable or explosive mixture. Thoroughly tested and approved by both governmental and commercial laboratories. Sherlock Leak Detector Type 1 is for use from +35 degrees Fahrenheit to +160 degrees Fahrenheit and dries clean leaving no greasy residue.
Sherlock T1-8S-24 has a 1 Year Shelf Life from the date of manufacture.
Approvals/References/Specs
- US Military Specification: MIL-L-25567
- US Military Specification: MIL-PRF-25567ESherlock Leak Detector, Type I Date Prepared: 012014
Section 1: Manufacturer
Winton Products Co., Inc. Phone: (704) 399-5151
2500 West Blvd. (Box 36332)
Charlotte, NC 28236
Section 2: Hazardous Ingredients/Identity Information
Non-hazardous per 29 CFR part 1910 subpart ZNFPA Hazard Rating (0=insignificant; 1=slight; 2=moderate; 3=high; 4=extreme
Fire: 0 Toxicity: 0 Reactivity: 0 Special:
HMIS (0=minimal; 1=slight; 2=moderate; 3=serious; 4=severe)
Health: 0 Flammability: 0 Reactivity: 0Section 3: Physical/Chemical Characteristics
Boiling point: 212 F (100 C) Specific Gravity(H2O=1): 1.006
Vapor Pressure (mm Hg.): 17.54 Melting Point: N/A
Vapor Density (AIR=1): 1.1832 Evaporation Rate (H2O=1): 1
Solubility in water: 100% Appearance/Odor: Yellow, clear liquid, odorless
Section 4: Fire and Explosion Hazard Data
No special fire fighting procedures
Section 5: Reactivity data
Stable Hazardous Decomposition: None
Incompatibility: None Hazardous Polymerization: None
Section 6: Health Hazard Data
Routes of Entry: Ingestion
Health Hazards: None
Medical Conditions Aggravated by Exposure: None
Emergency Procedures: Skin contact- flush with water
Ingestion- empty stomach, visit physician
Eye contact- flush with copious quantities of water
Section 7: Precautions for Safe Handling and Use
Spilled or Released Material: Wipe with absorbent material
placing rags in disposable container, complete clean-up
with water
Waste Disposal Method: Dispose of product in accordance
to local, county, state and federal regulations
Handling and Storing Precautions: Store in a dry area
above 32F, cap tightly to prevent evaporation
Other precautions: do not ingest, spray in eyes, or contact
with skin
Section 8: Control Measures
Respiratory Protection: None
Ventilation: None
Protective Gloves: Non-absorbent
Eye Protection: Goggles or shield
Other Protective Clothing or Equipment: Apron
Work/Hygienic Practices: Observe safe handling practices
Reviews
There are no reviews yet.