In Stock

TOA A-1724 Mixer Power Amplifier 240W/4, 100V. AC power

 182,000

Equipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1724 PA amplifier of 240 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.

Compare

Description

Power Source 220 – 230 V AC, 50/60 Hz
Rated Output 240 W
Power/Current Consumption 532 W (rated output), 220 W (EN60065), 60 mA or less (when power switch is OFF)
Frequency Response 50 Hz – 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1 – 6: -60 dB*, 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack
AUX 1 – 2: -20 dB*, 600 Ω, electronically-balanced,
combined type of XLR-3-31 equivalent and phone jack
(Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable)
AUX 3 – 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack
AUX 5: -20 dB*, 10 kΩ, unbalanced,
combined type of XLR-3-31 equivalent and phone jack
PWR AMP IN: 0 dB*, 600 Ω, unbalanced, RCA pin jack
(An equalizer or other signal processor connectable between LINE OUT
and PWR AMP IN terminals)
Output REC: 0 dB*, 600 Ω, unbalanced, RCA pin jack
LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack
SPEAKER SELECTOR: 2 zone, high impedance (100 V line/42 Ω), individual selector key,
M4 screw terminal
DIRECT SPEAKER OUT: High impedance (100 V line/42 Ω), M4 screw terminal
Low impedance (4 – 16 Ω), M4 screw terminal
(Both Low and High impedance terminals cannot be used at the same time.)
Phantom Power ON or OFF for each MIC1 – 6 with switch setting (+17 V DC)
S/N Ratio (Band Pass : 20 Hz – 20 kHz) 100 dB or more (Master volume: min)
76 dB or more (Master volume: max)
60 dB or more (MIC 1 – MIC 4)
53 dB or more (MIC 5, MIC 6)
76 dB or more (AUX 1 – AUX 5)
Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal
POWER REMOTE: No-voltage make contact input,
open voltage: 28 V DC (when the unit’s power is OFF),
short-circuit: 10 mA or less, M3 screw terminal
Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature -10 ℃ to +40 ℃
Finish Panel: ABS resin, black, hairline
Case: Steel plate, black
Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 13.5 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B
Volume control cover: YA-920

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Quick Comparison

SettingsTOA A-1724 Mixer Power Amplifier 240W/4, 100V. AC power removeAir F9 Pro+ Buds TWS F9 Earbuds Pro Plus - Wireless F9 removeMotorola Original (OEM) PMNN4409 PMNN4409AR IMPRES Li-Ion 7.4V, removeGATES SONIC TENSION METER 508C removeWT 1014 1-Channel Soldering Station Set, 95 W with soldering iron WSP 80 Robust article number: T0053442699N removePaper Shredder Official Series AS-890C remove
Imagesolding station
SKU
Rating
Price 182,000 2,000 7,000 209,820 130,000 24,000
Stock
Availability
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionEquipped with 6 Microphone inputs and 5 AUX inputs (simultaneous use of 9 inputs possible), the A-1724 PA amplifier of 240 W is designed to suit the following PA system applications: announcements, BGM, and broadcasting in mosques, churches, large rooms, and factories.
  • High-Quality Wireless Air F9 PRO+ Simple and Extraordinary, Born For Music
  • Tijarat Imported F9 Airdots Lightweight & Portable, HiFi Sound Quality Earbuds - Powerbank Airdots
  • Brand: Tijarar Air F9 Pro
  • Name: Powerbank Earbuds
  • Touch Control
  • Correspond with V4.0
  • Support: HSP, HFP, A2DP, AVRCP
  • Transmitting: Power, Class 2
  • Working Distance Range: < 10m
  • Frequency Range: 2.4026GHz - 2.480GHz
  • Talk Time: > 2.5 Hours
  • Music Time: > 2 Hours
  • Standby Time: > 30+ hours
  • Charge Time: < 1.5 Hours
  • Same as: Realme Air F9 Pro+

About this item

  • IMPRES 7.4V, 2150mAh Li-Ion
  • Compatible w/: XPR3300 Series, XPR3500 Series, XPR7350 Series, XPR7550 Series BrandMotorolaBattery Cell CompositionLithium IonUnit Count1 CountReusabilityRechargeable
For extremely accurate belt tension measuring, the Gates Sonic Tension Meter is an electronic device that measures the natural frequency of a free stationary belt span and instantly computes the static belt tension based upon the belt span length, belt width and belt type. Features: Can be used for synchronous and V-belts Uses sound waves instead of force/deflection Results are repeatable with any operator Portable, lightweight and easy to use Fast. Calculates tension in seconds Can be used in almost any environment Model 508C runs on two AAA batteries
  • If you have any query feel free to contact us.
  • We help you feel proud.
  • WT 1014 1-Channel Soldering Station Set, 95 W with soldering iron WSP 80 Robust article number: T0053442699N
Paper Shredder Official Series AS-890C
  • Crosscut: 5.6x47mm
  • 8 Sheets Shreds 1 credit card per pass
  • Bin Capacity: 13 Liter Brand: Aurora Product Code: Paper Shredder Official Series AS-890C Availability: In Stock
Content
Power Source 220 - 230 V AC, 50/60 Hz
Rated Output 240 W
Power/Current Consumption 532 W (rated output), 220 W (EN60065), 60 mA or less (when power switch is OFF)
Frequency Response 50 Hz - 20 kHz (±3 dB)
Distortion 2 % or less at 1 kHz, rated power
Input MIC 1 - 6: -60 dB*, 600 Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack AUX 1 - 2: -20 dB*, 600 Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack (Either MIC 5 or AUX 1, and either MIC 6 or AUX 2 selectable) AUX 3 - 4: -20 dB*, 10 kΩ, unbalanced, RCA pin jack AUX 5: -20 dB*, 10 kΩ, unbalanced, combined type of XLR-3-31 equivalent and phone jack PWR AMP IN: 0 dB*, 600 Ω, unbalanced, RCA pin jack (An equalizer or other signal processor connectable between LINE OUT and PWR AMP IN terminals)
Output REC: 0 dB*, 600 Ω, unbalanced, RCA pin jack LINE: 0 dB*, 600 Ω, unbalanced, RCA pin jack SPEAKER SELECTOR: 2 zone, high impedance (100 V line/42 Ω), individual selector key, M4 screw terminal DIRECT SPEAKER OUT: High impedance (100 V line/42 Ω), M4 screw terminal Low impedance (4 - 16 Ω), M4 screw terminal (Both Low and High impedance terminals cannot be used at the same time.)
Phantom Power ON or OFF for each MIC1 - 6 with switch setting (+17 V DC)
S/N Ratio (Band Pass : 20 Hz - 20 kHz) 100 dB or more (Master volume: min) 76 dB or more (Master volume: max) 60 dB or more (MIC 1 - MIC 4) 53 dB or more (MIC 5, MIC 6) 76 dB or more (AUX 1 - AUX 5)
Tone Control Bass: ±10 dB at 100 Hz, Treble: ±10 dB at 10 kHz
Control Input REMOTE VOLUME: M3 screw terminal POWER REMOTE: No-voltage make contact input, open voltage: 28 V DC (when the unit's power is OFF), short-circuit: 10 mA or less, M3 screw terminal
Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED
Operating Temperature -10 ℃ to +40 ℃
Finish Panel: ABS resin, black, hairline Case: Steel plate, black
Dimensions 420 (W) × 107.7 (H) × 367 (D) mm
Weight 13.5 kg
Accessory Power cord ……1, Terminal block cover ……1, Terminal block cover mounting screw ……2
Option Rack mounting bracket: MB-25B Volume control cover: YA-920

Product details of Air F9 Pro+ Buds TWS F9 Earbuds Pro Plus - Wireless F9 Airdots Pro+ Power Bank - Simple and Extraordinary, Born For Music - TWS V5.1 Bluetooth Earphone - Lightweight & Portable Tijarat Imported F9 Pro+ Airdots at Best Prices

  • High-Quality Wireless Air F9 PRO+ Simple and Extraordinary, Born For Music
  • Tijarat Imported F9 Airdots Lightweight & Portable, HiFi Sound Quality Earbuds - Powerbank Airdots
  • Specification
  • Technical Index
  • Brand: Tijarar Air F9 Pro
  • Name: Powerbank Earbuds
  • Touch Control
  • Correspond with V4.0
  • Support: HSP, HFP, A2DP, AVRCP
  • Transmitting: Power, Class 2
  • Working Distance Range: < 10m
  • Frequency Range: 2.4026GHz - 2.480GHz
  • Talk Time: > 2.5 Hours
  • Music Time: > 2 Hours
  • Standby Time: > 30+ hours
  • Charge Time: < 1.5 Hours
  • Same as: Realme Air F9 Pro+
  • What's in the box: F9 Earbuds With Free Charging Cable, 4 Earplugs and User Manual

F9 TWS High Power Wireless Headphones With Charging Case Box-Compatible Sweatproof Sports Ear Inserts With 9D HiFI Touch Control Tijarat Imported F9 Earbuds At Best Price in Pakistan

High-Quality Wireless Air F9 PRO+ Simple and Extraordinary, Born For Music
【Highly compatible】are compatible with Bluetooth-compatible adapters, such as Tecno, Infinix, iOS, Samsung, LG, Android, Huawei, PC, Windows.

Bluetooth Wireless Airdots/Earbuds

7.4V, 2150mAh High-Capacity

2150mAh High-Capacity Submersible Battery - Compatible w/: XPR3300 Series, XPR3500 Series, XPR7350 Series, XPR7550 Series

We don't know when or if this item will be back in stock.
Number of Batteries 1 Product Specific batteries required.
Brand Motorola
Battery Cell Composition Lithium Ion
Unit Count 1 Count
Reusability Rechargeable

About this item

  • IMPRES 7.4V, 2150mAh Li-Ion
  • Compatible w/: XPR3300 Series, XPR3500 Series, XPR7350 Series, XPR7550 Series

 

Correct belt installation tension is essential for optimum performance and reliability of multi-ribbed, V-belt and synchronous belt drives. The 508C sonic tension meter ensures simple and extremely accurate tension measurement by analysing sound waves from the belt through the sensor. It processes the input signals and displays the accurate tension measurement digitally. Gates’ tension meter is user-friendly: it is compact, computerised and stores data for repetitive use. Gates’ sonic tension meter measures belt tension accurately every time. It is supplied with a handy instruction manual.

TECHNICAL CHARACTERISTICS

  • Suitable for multi-ribbed belts, V-belts and synchronous belts.
  • CE approved.
  • RoHS 2 complaint: the device complies with the European Directive (2002/95/EC) on the restrictionof the use of certain hazardous substances in electrical and electronic equipment.
  • Batteries: 2 x AAA.
  • Measurement range: 10 Hz to 5,000 Hz.
  • Measured accuracy: ± 1%.
  • LCD screen backlight.
  • Double display possible (Newton and/or Hz).
  • Flexible flat sensor (standard included - PN 7420-00205).
  • Stores weight, width and span constants for up to forty different drive systems.
  • Auto gain adjustment function automatically eliminates background noise.
  • Cord sensor and inductive sensor available on request.
  • Compact model (H 160 mm x D 26 mm x W 59 mm).
  • Use and storage temperature range: -10°C to +50°C (free from condensation)

OPTIONAL ACCESSORIES

  • CORD SENSOR (PN 7420-00206) The cord sensor is recommended for measuring tensions at a distance from the tension meter.
  • INDUCTIVE SENSOR (PN 7420-00212) The inductive sensor is recommended for measurement particularly in noisy or windy environments. A steel clip to the back of the belt is required to measure the vibration frequency.
  • PACKAGE OFFERING (PN 7420-10508) Sonic 508C + Inductive sensor + Magnets.
Power unit WT 1, 1 channel with soldering iron WSP 80 Robust and safety rest WSR 201
WSP 80 Robust soldering iron (80 W) with power response tips for all standard applications, robust version. Tip family LT
OFF time, Process window, Lock function, Offset
 
The can-do WT soldering stations
High flex­i­bil­ity for ver­sa­tile ap­pli­ca­tions - WT Line They were made for each other. With Wellers WT Line com­pact, user-friendly suite of sol­der­ing and re­work prod­ucts all fit to­gether nicely to give you the space you crave on your work­bench. Stack­able, smart power units. In­ter­lock­ing, re­versible safety rests. Con­ve­nient and safe tip stor­age. A sleek 90 watt hy­brid pen­cil. Mi­crosol­der­ing ca­pac­ity. And back­wards com­pat­i­bil­ity af­ford­ing you over 1000 tip/ tool com­bi­na­tions.
WT Line Tool Selection
and com­pat­i­bil­ity ma­trix
The new WT 2M
Dual Power for high­est flex­i­bil­ity
WT 1 & WT 1H, The can-do soldering stations
These next-gen­er­a­tion, one-chan­nel sol­der­ing sta­tions aim to please.
WTHA 1
More than just a lot of hot air.
Microsoldering pencil and Microdesoldering tweezers
The WTP 90 hybrid soldering iron
the high-per­for­mance, 90 W hy­brid sol­der­ing iron from Weller.
Safety rests WSR
A safety rest that flips be­tween sponge and brass wool.
Product Description Paper Shredders are useful waste managing device. Unwanted trash or useless materials are shredded into small pieces. And then, used for recycling purpose so that amount of waste can be reduced. It can be used to shred checks, bank statements, medical records and receipts etc.
Features:
  • Thermal protection
  • Safety interlock power control
  • Manual reverse to clear paper jams
Specifications:
  • Crosscut: 5.6x47mm
  • 8 Sheets Shreds 1 credit card per pass
  • Bin Capacity: 13 Liter
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information